Used Cylinder Heads

Cylinder Heads

Cylinder heads of Wartsila, Paxman, MAN-B&W, MWM, Sulzer , Mak, Deutz, Mitsubishi, Caterpillar, Daihatsu, Bergen, Himsen, Allen, Stork, Fiat, SKL, Ruston, Crepelle, Mirrlees, Alco, Crepelle, Yanmar,  Pielstick, Hanshin, Nohab etc are available in stock.
 

The used cylinder heads are procured from the power plants and ship breaking yards and they are transported to our works. Cylinder heads are subject to crack detection test by MPI procedure, valve seat and valve guides are replaced wherever required.

After reconditioning cylinder heads are subject to hydraulic pressure test. We can also supply new cylinder heads.

Insitu Rotor Shaft- Inspection, Grinding and Polishing

 

Onsite Rotor Shaft Grinding and Polishing

Rotor shaft is mainly placed on white metal bearing. Due to continuous running it is observed that taper, ovality and rough surface is developed. It is important that during the major overhauling or after certain hours of operation as suggested by manufacturers rotor shaft is inspected.

RA Power Solutions has technicians who are qualified and experienced t o undertake onsite inspection of rotor shaft, alternator shaft, turbine shaft, alternator shaft and pump shaft. The rotor shaft inspection broadly includes crack detection by magnetic particle inspection (MPT), hardness check and dimensional inspection. In case any abnormalities are observed, RA Power Solutions technicians undertake onsite grinding and onsite polishing of rotor shaft maintaining tolerances and surface finish as per the manufacturers.